Closed-End Blind Rivets
Closed-End Blind Rivets, also known as Sealed Blind Rivets, are designed with a fully enclosed rivet body that prevents the passage of liquids, air, and contaminants through the fastened joint.
This product belongs to our Blind Rivets range.
Available Materials, Head Types & Surface Finishes for Closed-End Blind Rivets
Available in standard diameters, lengths and grip ranges for sealed fastening applications.
| Parameter | Available Options |
| Diameter: | 3.2 mm (1/8″), 4.0 mm (5/32″), 4.8 mm (3/16″), 5.0 mm, 6.4 mm (1/4″) |
| Length: | 6-20 mm(Available lengths vary by diameter) |
| Head Style: | Dome Head / Large Flange Head |
| Material: | Aluminum Alloy / Steel / Stainless Steel / Copper |
| Surface Finish: | Zinc Plating / Anodizing / Passivation |
| Grip Range: | Multiple options available according to rivet size and application |
Specifications & Size Options for Closed-End Blind Rivets
Closed-End Blind Rivets are available in a range of material combinations to meet different strength and environmental requirements:
| d | l +0.99 | dk | Hole | Min.Grip | Max.Grip | K (k2) | L1 | Minimum Tensile Strength (N) | Minimum shear Strength (N) | ||
| 06 | 11 | 06 | 11 | ||||||||
| Φ3.2±0.09 | 6 | Φ6.0±0.24 | Φ3.3 | 0.5 | 2.0 | 1.4（1.2） | 26 | 490 | 1240 | 457 | 1070 |
| Φ3.2±0.09 | 7 | Φ6.0±0.24 | Φ3.3 | 1.0 | 3.0 | 1.4（1.2） | 26 | 490 | 1240 | 457 | 1070 |
| Φ3.2±0.09 | 8 | Φ6.0±0.24 | Φ3.3 | 2.0 | 4.0 | 1.4（1.2） | 26 | 490 | 1240 | 457 | 1070 |
| Φ3.2±0.09 | 9 | Φ6.0±0.24 | Φ3.3 | 3.0 | 5.0 | 1.4（1.2） | 26 | 490 | 1240 | 457 | 1070 |
| Φ3.2±0.09 | 10 | Φ6.0±0.24 | Φ3.3 | 4.0 | 6.0 | 1.4（1.2） | 26 | 490 | 1240 | 457 | 1070 |
| Φ3.2±0.09 | 11 | Φ6.0±0.24 | Φ3.3 | 5.0 | 7.0 | 1.4（1.2） | 26 | 490 | 1240 | 457 | 1070 |
| Φ3.2±0.09 | 12 | Φ6.0±0.24 | Φ3.3 | 6.0 | 8.0 | 1.4（1.2） | 26 | 490 | 1240 | 457 | 1070 |
| Φ3.2±0.09 | 14 | Φ6.0±0.24 | Φ3.3 | 8.0 | 10.0 | 1.4（1.2） | 26 | 490 | 1240 | 457 | 1070 |
| Φ3.2±0.09 | 17 | Φ6.0±0.24 | Φ3.3 | 11.0 | 13.0 | 1.4（1.2） | 26 | 490 | 1240 | 457 | 1070 |
| Φ4.0±0.09 | 6 | Φ8.0±0.29 | Φ4.1 | 0.5 | 1.5 | 1.7（1.4） | 27 | 712 | 2130 | 580 | 1560 |
| Φ4.0±0.09 | 8 | Φ8.0±0.29 | Φ4.1 | 1.5 | 3.5 | 1.7（1.4） | 27 | 712 | 2130 | 580 | 1560 |
| Φ4.0±0.09 | 10 | Φ8.0±0.29 | Φ4.1 | 3.5 | 5.5 | 1.7（1.4） | 27 | 712 | 2130 | 580 | 1560 |
| Φ4.0±0.09 | 13 | Φ8.0±0.29 | Φ4.1 | 6.5 | 8.5 | 1.7（1.4） | 27 | 712 | 2130 | 580 | 1560 |
| Φ4.0±0.09 | 16 | Φ8.0±0.29 | Φ4.1 | 9.5 | 11.5 | 1.7（1.4） | 27 | 712 | 2130 | 580 | 1560 |
| Φ4.0±0.09 | 18 | Φ8.0±0.29 | Φ4.1 | 11.5 | 13.5 | 1.7（1.4） | 27 | 712 | 2130 | 580 | 1560 |
| Φ4.8±0.09 | 6 | Φ9.5±0.29 | Φ4.9 | 0.5 | 1.0 | 2（1.6） | 27 | 1120 | 3070 | 900 | 2230 |
| Φ4.8±0.09 | 8 | Φ9.5±0.29 | Φ4.9 | 1.0 | 3.0 | 2（1.6） | 27 | 1120 | 3070 | 900 | 2230 |
| Φ4.8±0.09 | 10 | Φ9.5±0.29 | Φ4.9 | 3.0 | 5.0 | 2（1.6） | 27 | 1120 | 3070 | 900 | 2230 |
| Φ4.8±0.09 | 12 | Φ9.5±0.29 | Φ4.9 | 5.0 | 7.0 | 2（1.6） | 27 | 1120 | 3070 | 900 | 2230 |
| Φ4.8±0.09 | 14 | Φ9.5±0.29 | Φ4.9 | 7.0 | 9.0 | 2（1.6） | 27 | 1120 | 3070 | 900 | 2230 |
| Φ4.8±0.09 | 16 | Φ9.5±0.29 | Φ4.9 | 9.0 | 11.0 | 2（1.6） | 27 | 1120 | 3070 | 900 | 2230 |
| Φ4.8±0.09 | 18 | Φ9.5±0.29 | Φ4.9 | 11.0 | 13.0 | 2（1.6） | 27 | 1120 | 3070 | 900 | 2230 |
| Φ4.8±0.09 | 20 | Φ9.5±0.29 | Φ4.9 | 13.0 | 15.0 | 2（1.6） | 27 | — | — | — | — |
| Φ4.8±0.09 | 22 | Φ9.5±0.29 | Φ4.9 | 15.0 | 17.0 | 2（1.6） | 27 | — | — | — | — |
| Φ4.8±0.09 | 25 | Φ9.5±0.29 | Φ4.9 | 18.0 | 20.0 | 2（1.6） | 27 | — | — | — | — |
| Φ5.0±0.09 | 8 | Φ9.5±0.29 | Φ5.1 | 1.0 | 3.0 | 2（1.6） | 27 | — | 3500 | — | 2420 |
| Φ5.0±0.09 | 10 | Φ9.5±0.29 | Φ5.1 | 3.0 | 5.0 | 2（1.6） | 27 | — | 3500 | — | 2420 |
| Φ5.0±0.09 | 13 | Φ9.5±0.29 | Φ5.1 | 6.0 | 8.0 | 2（1.6） | 27 | — | 3500 | — | 2420 |
| Φ5.0±0.09 | 15 | Φ9.5±0.29 | Φ5.1 | 8.0 | 10.0 | 2（1.6） | 27 | — | 3500 | — | 2420 |
| Φ5.0±0.09 | 18 | Φ9.5±0.29 | Φ5.1 | 10.0 | 13.0 | 2（1.6） | 27 | — | 3500 | — | 2420 |
| Φ5.0±0.09 | 23 | Φ9.5±0.29 | Φ5.1 | 16.0 | 18.0 | 2（1.6） | 27 | — | 3500 | — | 2420 |
| Φ5.0±0.09 | 28 | Φ9.5±0.29 | Φ5.1 | 21.0 | 23.0 | 2（1.6） | 27 | — | 3500 | — | 2420 |
| Φ5.0±0.09 | 30 | Φ9.5±0.29 | Φ5.1 | 23.0 | 25.0 | 2（1.6） | 27 | — | 3500 | — | 2420 |
| Φ6.4±0.11 | 10 | Φ12.7±0.35 | Φ6.5 | 1.0 | 3.0 | 2.7（2.2） | 31 | — | 5000 | — | 3950 |
| Φ6.4±0.11 | 13 | Φ12.7±0.35 | Φ6.5 | 4.0 | 6.0 | 2.7（2.2） | 31 | — | 5000 | — | 3950 |
| Φ6.4±0.11 | 15 | Φ12.7±0.35 | Φ6.5 | 6.0 | 8.0 | 2.7（2.2） | 31 | — | 5000 | — | 3950 |
| Φ6.4±0.11 | 18 | Φ12.7±0.35 | Φ6.5 | 9.0 | 11.0 | 2.7（2.2） | 31 | — | 5000 | — | 3950 |
| Φ6.4±0.11 | 20 | Φ12.7±0.35 | Φ6.5 | 11.0 | 13.0 | 2.7（2.2） | 31 | — | 5000 | — | 3950 |
Key Advantages of Closed-End Blind Rivets
Closed-End Blind Rivets feature a sealed rivet body end, making them suitable for applications requiring reduced passage through the rivet body.
Closed-End Design
Helps prevent liquid and contaminants from passing through the rivet body.
Reduced Moisture Ingress
Suitable for applications where limiting moisture entry through the rivet body is important.
Mandrel Retention
The mandrel is retained after setting, depending on the rivet design.
Reliable Joint Formation
Forms a secure joint when correctly selected and installed.
One-Side Installation
Allows installation from one side of the workpiece where rear access is limited.
Suitable for Enclosed Assemblies
Useful for assemblies where an open rivet body end is undesirable.
Closed-End vs Open-End Blind Rivets
Closed-End Blind Rivets differ from Open-End Blind Rivets primarily in sealing capability and corrosion resistance.
| Feature | Closed-End Blind Rivets | Open-End Blind Rivets |
|---|---|---|
| End structure | Sealed | Open |
| Waterproof performance | Yes | No |
| Corrosion protection | High | Standard |
| Typical use | Sealed applications | General fastening |
Typical Applications for Closed-End Blind Rivets
Closed-End Blind Rivets are widely used in applications requiring protection against moisture and contaminants, including:
Customization, Quality Control & Supply Capability
RivetFast offers drawing-based customization for Closed-End Blind Rivets, including dimensions, materials, head styles, surface finishes, and packaging.
Customization
Dimensions, materials, finishes and packaging tailored to your specifications.
Quality Control
Dimensional checks, material verification and relevant product testing.
Manufacturing & Bulk Supply
In-house production and support for repeat and bulk orders.
Looking for standard or customized Closed-End Blind Rivets?
Send us your specifications for a quotation.
Installation Tools & Setting Process for Closed-End Blind Rivets
Closed-End Blind Rivets can be installed using compatible manual, pneumatic, or electric rivet tools. Correct hole size, grip range, and tool selection help ensure proper installation.
Need help selecting the right rivet size or grip range?
Why Choose RivetFast for Your Blind Rivets?
ISO 9001 Certified Quality Management
RivetFast manufactures blind rivets under an ISO 9001 certified quality management system, supporting controlled production processes and consistent quality management.
In-House Inspection & Testing
Dimensional checks and relevant product tests help verify specified requirements. Our testing capabilities include tensile, hardness, and salt spray testing, depending on the product and inspection requirements.
A Broad Range of Blind Rivets
From open-end and multi-grip to closed-end, structural, and specialty blind rivets, our range covers different fastening designs, materials, and application needs.
Factory Manufacturing & Custom Support
With in-house manufacturing, 200+ automated machines, and an annual production capacity of 2 billion+ pieces, RivetFast supports bulk orders, repeat supply, and drawing-based customization.
Request a Quote for Closed-End Blind Rivets
Contact us with your required size, material, and order quantity—we will reply within 24 hours.
No complete specifications? No problem. Send us what you have and we’ll help confirm the requirements.
FAQ — Closed-End Blind Rivets
Q1:What is the main feature of Closed-End Blind Rivets?
They provide a sealed fastening to prevent water, dust, or contaminants from entering the joint. For general-purpose fastening without sealing, see Open-End Blind Rivets.
Q2:Which materials are suitable for Closed-End Blind Rivets?
Aluminum, steel, and stainless steel combinations. For high-strength, load-bearing needs, Structural Blind Rivets may be more appropriate.
Q3:Can Closed-End Blind Rivets be used in outdoor environments?
Yes, their sealed design makes them ideal for outdoor or harsh conditions.
Q4:What tools are required to install Closed-End Blind Rivets
Manual, pneumatic, or electric rivet tools are suitable. Refer to Installation Tools & Setting Process for Closed-End Blind Rivets.
Q5:How to select the correct size for Closed-End Blind Rivets?
Use the Specifications & Size Options for Closed-End Blind Rivets to match material thickness.
Q6:Can Closed-End Blind Rivets be customized?
Yes, OEM/ODM services are available for special materials, dimensions, or packaging.
This product is part of RivetFast’s Blind Rivets product range and is manufactured to meet industrial fastening requirements.
